Webinar: Advanced Protective Apparelfor Heat and Flame Risks(ISO 11612-2015, IS 15748-2022) scheduled on 14th November 2025 Click Here

Testing facility

Our laboratory is equipped to handle both sampling and testing in one centralized location, making it ideal for new product development. Our capabilities include sample spinning, weaving, knitting, and nonwoven prototyping, along with performance testing, enabling faster product development. 

Martindale Abrasion Tester

The results of a Martindale test show how much wear and tear a fabric will take before there is a noticeable change in appearance.

Taber Abrasion Tester

Abrasion testing is the act of rubbing a material at a specific weight and speed to determine at what point the material begins to wear.

Contact Heat Transmission

It is used to evaluate the performance of protective clothing, hand protectors, or its constituent materials against high contact temperatures (ranging from 100 to 500 degree Celsius).

Large Splashes of Molten Metals

The test apparatus is aim to determine the protection effects of PPE (personal protective equipment) against to splashes of molten aluminium, molten cryolite, molten copper, molten iron and molten mild steel.

Radiant Heat Transmission

The radiant heat transfer indexes, and percentage heat transmission factor are calculated from the temperature rise data and are served to evaluate the specimen heat protective performance.The samples can be tested at different heat flux.

Convective Heat Transmission

The convective heat resistance test device consists of a burner, a heat resistant shield, a copper calorimeter and a test stand. The sample is exposed to the flame (at 80kW/m2) and heat transfer index (HTI) for 24 degree Celsius rise is calculated.

Universal Testing Machine

A Universal Testing Machine (UTM) is a test machine used to test the mechanical properties of a sample by applying a tensile compressive load. A universal test machine is designed to meet a wide range of tests by simply switching out different grips. This machine is capable of determining tensile, tear, puncture resistance of material. Resistance against hypodermic needle can also be tested.

Surface Resistance Tester

The Material Resistivity Tester can be used to measure the surface resistivity and volume resistivity of variety of fabrics, clothing, and other insulating material.. The performance of conductive samples under specific condition can be determined by this test.

Electrostatic Charge Decay Tester

Static Decay Tester apply to test textile and garment, medical protective clothing, nonwoven, composite material, thin-film material and other materials after applied particular voltage and half charge decay time (or as required) may be calculated from the peak value of the applied voltage.

TDM Cut Tester

The TDM test measures the amount of force applied to a straight blade to cut through the material with a single 20mm stroke. This resistance is denoted by the letters A to F. A stands for lower cut resistance. ASTM F 2992 or ISO 13997 may be followed for conducting the test.

Impact Tester

The impact test evaluates the resistance of textiles to the impact due to the drop of certain load in accordance with the test standard. BS EN 13694 and 1621 may be followed for conducting the test.

Flammability

The vertical flammability test and the horizontal flammability test, which measure how quickly a textile ignites and spreads flame. Surface and bottom edge ignition can be done on the samples and performance is evaluated by determining after flame and afterglow time.

NOTES:

  • Wet-flex Testing, Heat resistance & small splashes of molten metal  testing also available.
Quick Links
Services
Follow Us
Contact